Viewing Atm-To-Atm Vcc Svc Connections - Lucent Technologies PacketStar PSAX Series User Manual

1-port channelized sts-1e, t1 format module

Hide thumbs Also See for PacketStar PSAX Series:

Table of Contents

Chapter 7 Provisioning Connections Using the Console Interface

Adding a Circuit Emulation-to-Circuit Emulation PVC Connection

Table 7-22. Field Values for the VBR-to-VBR VCC Connection Statistics Window

Encoded Odometer

(display only)

Decoded Odometer

(display only)

Time Elapsed

(display only)

Time Since Reset

(display only)

Viewing ATM-to-ATM VCC SVC Connections

1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1

Total number of cells encoded going in interface side A or

B since the connection was created.

Total number of cells decoded going out interface side A

or B since the connection was created.

Time elapsed since the circuit was established.

Time elapsed since the last time the Reset Odometers

command was used.

Note: The Reset Odometers command on the statistics

window resets only the odometer fields and the

corresponding clock. Other counters increment for the

life of the circuit.

The SVC connections that display on the ATM-to-ATM VCC SVC Table

window change dynamically as they are created and then torn down. Use

the following steps to display SVC connections, starting at the Connection

Configuration Menu window.

In the Connection Configuration Menu window, select ATM-to-ATM

VCC/VPC and press Enter.

The ATM-to-ATM VCC/VPC SVC/SVP Table window is displayed (see

Figure 7-32)