The HDLC Passthrough Interface
Configuring the HDLC Passthrough Interface
Setting Up the Interface
Buttons
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
255-700-184
Chapter 6 Configuring the Interfaces Using the AQueView
This section provides instructions for configuring an I/O module for the
HDLC Passthrough interface.
If you applied the value HdlcPassThrough as the interface type in the
Channel Configuration page, the HDLC Pass Through Interface
Configuration window appears (see Figure 6-23).
Figure 6-23. HDLC Pass Through Interface Window
The buttons in this window have the following functions:
®
System
The HDLC Passthrough Interface
Release 7.0
6-53