Adding Entries To The Atm Iisp Cbr Routing Table; Creating Iisp Vbr Entries - Lucent Technologies PacketStar PSAX Series User Manual

1-port channelized sts-1e, t1 format module
Hide thumbs Also See for PacketStar PSAX Series:
Table of Contents

Advertisement

Chapter 7 Provisioning Connections Using the Console Interface
Adding a Circuit Emulation-to-Circuit Emulation PVC Connection
Table 7-24. Field Values for the ATM-to-ATM VCC /VPC SVC/SVP Statistics Window
Field Names
Port
(display only)
Channel
(display only)
VPI
VCI
cell Drop/Tag
Cells Received
Cells Transmitted
Received Odometer
Transmitted Odome-
ter
Time Elapsed
Time Since Reset

Adding Entries to the ATM IISP CBR Routing Table

Creating IISP VBR
Entries
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
7-92
Values
Range: 1-30
Select the port number on the module for which you are
creating a connection. Select port numbers for both sides
of the connection.
Range: 1-32
Select the channel number of the port on the module for
which you are creating a connection. Select channel num-
bers for both sides of the connection.
Range: 0 to 255 Virtual path identifier. Enter a value for ATM side of the
connection.
Range: 32 to
Virtual channel identifier. Enter a value for the ATM side of
65535
the connection.
Cells dropped or tagged due to UPC/traffic policing.
6.5000 e1
Total number of OAM cells received on Interface A or B.
(default)
6.5000 e1
Total number of OAM cells transmitted on Interface A or B.
(default)
6.5000 e1
Total number of ATM cells received on Interface A or B
(default)
since odometer was last reset.
6.5000 e1
Total number of ATM cells transmitted on Interface A or B
(default)
since odometer was last reset.
(Format is )
Total time elapsed for OAM statistics collection.
Format is )
Total time elapsed for OAM statistics collection since the
last odometer reset.
5 Press Ctrl+G and select the Save Configuration menu option.
End
Use the steps in the following procedure to add an entry to the CBR routing
table, starting at the Connection Configuration Menu window.
Creating Entries in the IISP VBR Routing Table
Begin
1 On the Connection Configuration Menu window, select the IISP CBR
Routing Table option and press Enter.
The IISP CBR Routing Table window will display (see Figure 7-37)
Description
.
Release 7.0
255-700-184

Advertisement

Table of Contents
loading

Table of Contents