Chapter 8 Provisioning Connections Using the AQueView
Creating ATM-to-ATM VPC PVC Connections
Primary Page
Primary Page Buttons The buttons on the Primary page have the following functions:
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
8-74
Table 8-12. Field Values for the Circuit Emulation-to-Circuit Emulation PVC
Connection Window
Field Names
Connection
None (default)
Failure Cause A
Physical
(display only)
Connection
None (default)
Failure Cause B
Physical
(display only)
If the parameters are valid, the Connections window appears with the
new connection in the Listing page, and the Display Connection
window appears with tabs that contain details about the connection (see
Figure 8-42): Primary, Statistics, and Utilization.
If a parameter is invalid, a Connection Creation Failed message appears,
stating the reason for the failure.
The Primary page displays the information used to create the connection.
See Table 8-12 for field descriptions.
Figure 8-42. Display Connection: Circuit_Emulation-to-Circuit_Emulation
(Primary Page)
®
System
Values
General connection failure cause.
General connection failure cause.
Description
Release 7.0
255-700-184