Table of Contents
Advertisement
Chapter 8 Provisioning Connections Using the AQueView
Creating ATM-to-ATM VPC PVC Connections
Creating an In-Band-
to-ATM Connection
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
8-108
AQueView EMS will not cause the applied values to be lost because the
configuration data is stored on the PSAX system, not in the AQueView EMS.
End
Creating an In-Band-to-ATM VCC PVC Connection
Begin
1 Click the Connections tab.
The Listing page appears.
2 Click the right mouse button and a menu appears. Click Create New.
The Create Connection window appears (see Figure 8-58).
Figure 8-58. Create Connection Window
3 On the Side A panel in the Slot field, select In-Band Management.
4 Select the appropriate slot, port, and channel for a module that is
configured with one of the following interfaces on the Side B panel:
~ ATM UNI 3.0
~ ATM UNI 3.1
~ ATM IISP
~ ATM PNNI
The interface name appears in the Interface field on the Side B panel.
In-Band_Management_IP_PVC appears in the Connection Type field.
5 Click Create.
The Create In-Band_to_ATM IP PVC Connection window appears (see
Figure 8-59).
®
System
Release 7.0
255-700-184
Advertisement
Table of Contents
