Table of Contents
Advertisement
Chapter 7 Provisioning Connections Using the Console Interface
Adding a Circuit Emulation-to-Circuit Emulation PVC Connection
Viewing the VBR-to-
ATM Connection
Statistics
Commands
®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
7-72
4 To add (apply) the connection configuration, select the Add This
Connection command and press Enter.
5 To review this connection, select the Go Back to Connection Table
command and press Enter (or press Ctrl+B).
The VBR-to-ATM VCC PVC Table window (see Figure 7-26) is returned,
displaying the values you just applied.
6 To add more connections of this type, repeat steps 2–5 for more
connections as needed.
7 To permanently save these connections, press Ctrl+G to return to the
Console Interface Main Menu window.
8 Select Save Configuration, and press Enter to store the values to the
PSAX system database.
End
From the VBR-to-ATM VCC PVC Connection window, select the View
Connection Statistics command and press Enter.
The VBR-to-ATM VCC PVC Statistics window is displayed, as shown in
Figure 7-28.
Figure 7-28. VBR-to-ATM VCC PVC Statistics Window
The commands on this window have the following functions:
Release 7.0
255-700-184
Advertisement
Table of Contents
