Filtering The Listing Page By Psax Locations - Lucent Technologies PacketStar PSAX Series User Manual

1-port channelized sts-1e, t1 format module
Hide thumbs Also See for PacketStar PSAX Series:
Table of Contents

Advertisement

Filtering the Listing Page by PSAX Locations

®
1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1
PacketStar
255-700-184
Chapter 8 Provisioning Connections Using the AQueView
3 Remove the check mark next to any connection type that you do not
wish to view in the Listing page.
4 If you want to filter the Listing page further, make selections in the Filter
By Interface panel (see "Filtering the Listing Page by PSAX Locations").
5 When finished selecting all the desired filters, click Apply Filter.
Note:
Only the connection types you selected will appear in the Listing
page.
End
The Filter By Interface panel in the Filter page lets you select specific
locations on the PSAX device by which to filter the list of connections. This
panel contains the following user-selectable options:
~ Slot—Allows you to view only connections from a specific module or
from all modules.
~ Port—Allows you to view only connections from a specific port or
from all ports
~ Channel—Allows you to view only connections from a specific
channel or from all channels
Perform the steps in the following procedure to filter the Connection List by
PSAX hardware.
Viewing Connections by PSAX Location
Begin
1 In the Provisioning window, click the Connections tab.
The Listing page appears.
2 Click the Filter tab and the Filter page appears.
3 In the Filter by Interface panel (see Figure 8-8), select the following
values:
a. A module in the Slot field to remove any connection that does not
begin or end at the module from the Connection page.
b. A port number in the Port field to remove any connection that does
not begin or end at a port with that number from the Connection
page.
c. A channel number in the Channel field to remove any connection
that doesn't begin or end at a port with that channel from the
Connection page.
4 If you want to filter the Listing page further, make selections in the
Filter By Connection Type panel (see "Filtering the Listing Page by
Connection Type").
®
System
Filtering Connections in the List
Release 7.0
8-11

Advertisement

Table of Contents
loading

Table of Contents