Using The Right-Click Menu; Connection Provisioning - Lucent Technologies PacketStar PSAX Series User Manual

1-port channelized sts-1e, t1 format module

Hide thumbs Also See for PacketStar PSAX Series:

Table of Contents

Chapter 8 Provisioning Connections Using the AQueView

Using the Right-Click Menu

1-Port Channelized STS-1e, T1 Format Module User Guide, Issue 1

Attempting to create a connection that already exists

Attempting to use a VCI, VPI, DCLI, or channel that is already allocated

For more information about these SNMP trap messages, see the appendix

"SNMP Trap Messages" in the appropriate PacketStar

Gateway User Guide.

An interface for the appropriate port and channels must be

applied and the interfaces must be brought into service at least

once before creating a connection.

To create a non-UBR connection type, the committed rates and

burst sizes must be adjusted to match a portion of the available

You can perform various functions in the AQueView system by clicking the

right mouse button. This section describes the right-click menu options you

can use in the various windows in the AQueView system when creating

connections.

Figure 8-14. Connection Configuration Right-Click Menu Options

Table 8-2. Descriptions of the Connection Provisioning Right-Click Menu Options

Displays the Display Connection window for the specified

Eliminates all selected connections.

You can select multiple connections to delete simulta-

neously by holding the Ctrl key while highlighting the con-

nections with the mouse.

Makes a new connection on any existing interfaces

PSAX Multiservice Media