Installing An M.2 Fru On The Avago Sas3004Imr Pcie Raid Controller Card; Installing The Supercapacitor - Huawei FusionServer Pro CH121 V5 User Manual

FusionServer Pro CH121 V5 Compute Node
User Guide
5.2.4 Installing an M.2 FRU on the Avago SAS3004iMR PCIe
RAID Controller Card
The M.2 FRU on the Avago SAS3004iMR RAID controller card is hot swappable.
Procedure
Step 1 Determine the position of the M.2 FRU on the Avago SAS3004iMR RAID controller card.
Step 2 Install an M.2 FRU on the Avago SAS3004iMR PCIe RAID controller card.
1.
2.
3.
Figure 5-5 Installing an M.2 FRU
----End

5.2.5 Installing the Supercapacitor

Procedure
Step 1 Power off the compute node.
For details, see
Step 2 Remove the compute node.
For details, see
Step 3 Place the compute node on the ESD workstation.
Issue 06 (2019-08-10)
Take a spare M.2 FRU out of its ESD bag.
Open the handle of the M.2 FRU and push the M.2 FRU into the slot of the Avago
SAS3004iMR RAID control card. See (1) in
Close the handle of the M.2 FRU. See (2) in
3.1 Power-Off
3.3 Removing a CH121
Copyright © Huawei Technologies Co., Ltd.
Figure
Figure
Procedure.
V5.
5 Optional Part Installation
5-5.
5-5.
98