Removing Components - Huawei E9000 User Manual

E9000 Server
User Guide
No.
6
7
8
9
10
----End

3.3 Removing Components

This section describes how to remove fan modules, PSUs, management modules, switch
modules, and pass-through modules from the E9000 chassis before installing the chassis.
Scenarios
If no chassis moving tool (such as an elevating ladder) is available, remove the fan modules,
PSUs, management modules, switch modules, and pass-through modules from the E9000
chassis before installing the chassis. Place the removed modules in ESD bags or on an ESD
floor without stacking them. When all these modules are installed in the E9000 chassis, the
total weight is around 100 kg (220.5 lb), which exceeds the allowed maximum weight (68 kg
or 149.94 lb) carried by four persons.
If a chassis moving tool is available, move the chassis without removing the components.
However, you must remove the components before installing the chassis.
Workflow
Users do not need to strictly follow the workflow.
Issue 25 (2019-11-30)
Material
Guide rail
Floating nut hook
Network cable
Power cable
Product documentation bag
NOTE
The product documentation bag
contains a copy of Huawei Server
Warranty, an E9000 chassis
installation template, and a copy of
the E9000 Server Quick Start Guide.
The allowed maximum weight must comply with local laws and regulations.
Copyright © Huawei Technologies Co., Ltd.
Quantity
2 (optional)
1
Depending on the contract
Same as the number of PSUs
1
3 Installing the E9000
48