Removing The Supercapacitor (Raid Controller Card) - Huawei 5288 V3 V100R003 User Manual

5288 V3 Server
User Guide
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Remove the standard RAID controller card to be replaced. For details, see
Standard RAID Controller
Step 3 Take the spare standard RAID controller card out of its ESD bag.
Step 4 Install the standard RAID controller card.
l
l
Step 5 Check the chip model of the RAID controller card to be installed.
If the chip model of the RAID controller card to be installed is LSI SAS3108, remove the
trans flash module (TFM) first. For details, see
(Standard RAID Controller
If the chip model of the RAID controller card to be installed is PM8060, remove the cable
between the supercapacitor and the RAID controller card. For details, see
Supercapacitor (Standard RAID Controller
Step 6 Connect the SAS cables to the standard RAID controller card.
Step 7 Install the chassis cover. For details, see
Step 8 Install the 5288 V3. For details, see
Step 9 Connect all internal cables such as power and network cables. For details, see
External
Step 10 Power on the 5288 V3. For details, see
Step 11 Log in to the RAID configuration screen to check whether RAID configuration needs to be
imported or activated. For details, see the
User
----End

7.33 Removing the Supercapacitor (RAID Controller Card)

Remove the supercapacitor before replacing it with a new one.
When LSI SAS3108 RAID controller cards are configured, supercapacitors can be configured
to provide extra power. Before removing a supercapacitor, power off the server. Pay attention
to electrical safety.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the rack number and chassis number of the server to be removed, and label its
panel to prevent misoperations.
Issue 26 (2018-11-19)
For details about how to install the standard RAID controller card on the mainboard, see
7.22.2 Installing a PCIe Card on the
For details about how to install the standard RAID controller card on the riser card, see
7.22.1 Installing a PCIe Card on the Riser
Cables.
Guide.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Instructions.
Card.
Mainboard.
Card.
7.36 Installing the Supercapacitor
Card).
Card).
7.12 Installing the Chassis
3.4 Installing the
4.1 Powering On the
HUAWEI V2&V3 Server RAID Controller Card
1 Safety Instructions.
7.31 Removing the
7.36 Installing the
Cover.
Server.
Server.
7 Replacing Parts
3.5 Connecting
175