Supercapacitor - Huawei TaiShan 2280 V2 User Manual

TaiShan 2280 V2 Server
User Guide
Step 16 Connect the power cables. For details, see
Step 17 Power on the server. For details, see
Step 18 Log in to the iBMC WebUI, and check whether the new component is normal. For details, see
the
----End

5.7 Supercapacitor

To install a supercapacitor, perform the following steps:
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Power off the server. For details, see
Step 3 Remove the power cables. For details, see
Step 4 Remove the server. For details, see
Step 5 Remove the chassis cover. For details, see
Step 6 Take a spare supercapacitor out of its ESD bag.
Step 7 Place the supercapacitor downwards and exert even force to install it in the tray. Ensure that
the supercapacitor is secured by the latches. See
Figure 5-13 Installing a supercapacitor
Step 8 Secure the supercapacitor to the air duct. See
Issue 01 (2019-07-01)
TaiShan Rack Server iBMC User
NOTE
Before installing a supercapacitor, power off the server for electrical safety.
Copyright © Huawei Technologies Co., Ltd.
3.5 Connecting Cables to a
3.1 Powering On the
Guide.
12 Preventing Electrostatic
3.2 Powering Off the
3.4 Removing Cables from a
3.3 Removing the Server and Guide
3.6 Removing the Chassis
Figure 5-13.
Figure 5-14.
5 Optional Part Installation
PSU.
Server.
Discharge.
Server.
PSU.
Rails.
Cover.
94