Removing And Installing A Switch Module - Huawei E9000 User Manual

E9000 Server
User Guide

6.3.5 Removing and Installing a Switch Module

Procedure
Step 1 Remove a switch module.
1.
2.
3.
4.
5.
Step 2 Install a switch module.
1.
Issue 25 (2019-11-30)
Use a Phillips screwdriver to loosen the two M3 captive screws on the switch module.
See (1) in Figure 6-20.
Figure 6-20 Removing a switch module
Completely open the two ejector levers on the switch module. See (2) in
Horizontally pull out the switch module from the chassis. See (3) in
Completely close the ejector levers on the switch module. See (4) in
NO TICE
Each ESD bag should hold only one switch module.
Place the removed switch module into an ESD bag.
Completely open the two ejector levers on the switch module and horizontally insert the
switch module into the chassis. See (1) and (2) in
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
Figure
Figure
Figure
Figure 6-21.
6-20.
6-20.
6-20.
118