Table of Contents
Advertisement
Powertrain
2.2.1.1
1
Clutch disk
2
Intermediate plates
3
Pressure plate
4
Housing
A
Wings of sintered disks
B
Hub gear teeth
C
Clutch housing
911 GT3 Cup (991 II)
64
2.2 Clutch
A Sachs three-disk sintered metal clutch is used in the 911 GT3 Cup (991 II). The clutch
has been designed particularly for the loads in motor sports and combines high
performance and temperature durability with reduced weight and low moment of
inertia.
2.2.1
2.2.1 Installation instructions
Make sure that the wings of the multiple-disk clutch sintered disks (1) are stacked and
aligned (A) if possible. Lightly grease the gear teeth of the hub (B) and move the clutch
disks back and forth on the connecting shaft gear teeth until the hub moves smoothly
on the shaft. If required, remove excess grease.
NOTE
MY 2018
Do not drive the vehicle with slipping clutch. This will
Information
cause excessive wear or overheating (maneuvering,
loading and unloading, etc.).
Contaminated/oily clutch linings
Clutch slips
Do not allow greases/oils to come into contact
with clutch linings.
Version: 4/20/2018
Advertisement
Table of Contents
