Headlight Beam Adjustment; Direction Indicator/High Beam/Parking Light/Headlight Flasher Stalk - Porsche 911 Turbo Manual

Headlight Beam Adjustment

Vehicles with Bi-Xenon headlights feature
automatic headlight beam adjustment.
When the ignition is switched on, the level of the
headlight beam automatically changes in accord-
ance with the vehicle load.
The level of the headlight beam is automatically
kept constant during acceleration and braking.
Checking operation
1. Switch the dipped beam on.
2. Insert ignition key and switch on ignition.
The light beam first dips all the way down and
is then adapted to the vehicle load.
If this test point is not satisfied, the headlight
beam adjustment system must be checked.
f Consult a qualified specialist workshop. We
recommend a Porsche partner for this work as
they have trained workshop personnel and the
necessary parts and tools.
Direction Indicator/High Beam/
Parking Light/Headlight Flasher
Stalk
Direction indicators, dipped beam and high beam
are ready for operation when the ignition is on.
1 – Direction indicator left
2 – Direction indicator right
Push the stalk to the upper or lower pressure
point – direction indicators flash three times
3 – High beam
4 – Headlight flasher
Stalk in centre position – dipped beam
When high beam and headlight flasher are
selected, the blue indicator light in the tachometer
is lit.
Parking light
The parking light can only be switched on when
the ignition is switched off.
f Move the stalk up or down to switch on the
right or left parking light.
Controls, Safety, Instruments
115