Routing An Isdn/Sip Ddi Trunk To Voice Mail - NEC SL2100 Quick Install Manual

Routing ISDN/SIP DDI trunk to voicemail
4 – Routing an ISDN/SIP DDI Trunk to voice mail
For DDI calls to route to voicemail we can use the DDI routing table to add voice mail as a target.
Use Quick Install >DDI >DDI Routing to configure your DDI numbers.
102 is a fixed target number for voice mail.
102 is valid in
Targets 2 or 3
The @ symbol can
define a specific
This option must be set for
mailbox (group
the call to transfer from one
mailboxes)
target to the next one
The @ symbol can be used within Target1 to specify the mailbox number to be used when the call reaches
voicemail.
The digits after the @ define the mailbox, for example @552.
You can still use Target1 as usual, for example to define the target to route to extension 206 and when reaching
voicemail to use mailbox 552 enter: 206@552.
Quick Install Guide – SL2100 InMail Voicemail rev 1.2
12