Cable Routing And Clamping; Installing The Expansion Pcbs; General - NEC Xen Topaz System Hardware Manual

Xen Topaz
S 2
E C T I O N
I
NSTALLING THE
E PCB
XPANSION S
Trunk/Extension Cabling and Installing the Expansion PCBs

1.5 Cable Routing and Clamping

1. There are two exits (Right and Left) for cables. Clamp and route
cables to outside.
2. Use a blunt object to remove the plastic filler piece(s) at the Sub-
Cover for Cables.
3. Replace the Sub-Cover.

2.1 General

In order to expand the system capacity, up to two 308E/008E
Expansion PCBs can be installed in the KSU.
System Hardware Manual
- 29