Standard Dio, Fi, Fo - ABB ACS880 Firmware Manual
Industrial drives, winder control program, option +n5000
Hide thumbs
Also See for ACS880:
- Firmware manual (764 pages) ,
- Manual (646 pages) ,
- Quick start up manual (146 pages)
Table of Contents
Advertisement
190 Parameters
No.
Name/Value
11
11 Standard DIO, FI, FO
11.01
DIO status
0000b...0011b
11.02
DIO delayed status
0000b...0011b
11.05
DIO1 function
Output
Input
Frequency
11.06
DIO1 output source
Not energized
Energized
Ready run
Enabled
Started
Magnetized
Running
Ready ref
At setpoint
Reverse
Zero speed
Above limit
Warning
Fault
Fault (-1)
Open brake
command
Ext2 active
Remote control
Supervision 1
Supervision 2
Supervision 3
RO/DIO control
word bit0
Description
Configuration of digital input/outputs and frequency
inputs/outputs.
Displays status of digital input/outputs DIO1 and DIO2. The
activation/deactivation delays (if any are specified) are
ignored.
Example: 0010 = DIO2 is on, DIO1 is off.
This parameter is read-only.
Status of digital input/outputs.
Displays delayed status of digital input/outputs DIO1 and
DIO2. This word is updated only after activation/deactivation
delays (if any are specified).
Example: 0010 = DIO2 is on, DIO1 is off.
This parameter is read-only.
Delayed status of digital input/outputs.
Selects whether DIO1 is used as a digital output or input, or
a frequency input.
DIO1 is used as a digital output.
DIO1 is used as a digital input.
DIO1 is used as a frequency input.
Selects a drive signal to be connected to digital input/output
DIO1 when parameter
11.05 DIO1 function
Output is off.
Output is on.
Bit 1 of
06.11 Main status word
Bit 0 of
06.16 Drive status word 1
Bit 5 of
06.16 Drive status word 1
Bit 1 of
06.17 Drive status word 2
Bit 6 of
06.16 Drive status word 1
Bit 2 of
06.11 Main status word
Bit 8 of
06.11 Main status word
Bit 2 of
06.19 Speed control status word
Bit 0 of
06.19 Speed control status word
Bit 10 of
06.11 Main status word
Bit 7 of
06.11 Main status word
Bit 3 of
06.11 Main status word
Inverted bit 3 of
06.11 Main status word
Bit 0 of
44.01 Brake control status
Bit 11 of
06.16 Drive status word 1
Bit 9 of
06.11 Main status word
Bit 0 of
32.01 Supervision status
Bit 1 of
32.01 Supervision status
Bit 2 of
32.01 Supervision status
Bit 0 of
10.99 RO/DIO control word
is set to Output.
(see page 169).
(see page 169).
(see page 169).
(see page 170).
(see page 169).
(see page 169).
(see page 169).
(see page 172).
(see page 172).
(see page 169).
(see page 169).
(see page 169).
(see page 169).
(see page 358).
(see page 169).
(see page 169).
(see page 311).
(see page 311).
(see page 311).
(see page 189).
Def/FbEq16
-
1 = 1
-
1 = 1
Output
0
1
2
Ready run
0
1
2
4
5
6
7
8
9
10
11
12
13
14
15
22
23
24
33
34
35
40
- Quick Links:
- Modbus Holding Register Addresses
Hide quick links:
Advertisement
Chapters
Table of Contents
