ABB ACS880 Firmware Manual page 455

No. Name/Value
82.62 VR Diameter ratio
0.0000...10.0000
82.64 Actual wrap count
0.00...65536.00
82.71 VR Estimated
tension
-32767.0...
32767.0 N/m
82.72 VR Estimated force
-32767.0...
32767.0 N
82.89 VR Function status
Bit Name
0 Simulation Mode
1 Counter on Hold
2 Winding-on
3 Unwinding
4 Diameter count
active
5 Reserved
6 VR Reset active
7 VR Preset active
8 VR is at Core
9 VR got over Full Roll 1 = Virtual roll has full roll.
10...13 Reserved
14 Length counter
overflow
15 Speed above Sim
Limit
0b0000... 0b111111
Description
Displays diameter ratio of virtual roll.
This parameter is read-only.
Diameter ratio.
Displays actual wrap count.
This parameter is read-only.
Wrap count.
Displays estimated tension of virtual roll.
This parameter is read-only.
Estimated tension.
Displays estimated force of virtual roll.
This parameter is read-only.
Estimated tension.
Simulator status of virtual roll.
This parameter is read-only.
Description
1 = Simulation mode is activated.
0 = Simulation mode is disabled.
1 = Wrap counter is on hold.
0 = Wrap counter is activated.
1 = Counter is increasing the virtual roll diameter.
0 = Counter is not increasing the virtual roll diameter.
1 = Counter is decreasing the virtual roll diameter.
0 = Counter is not decreasing the virtual roll diameter.
1 = Diameter counter is active.
0 = Diameter counter is not active.
1 = Virtual roll reset is active.
0 = Virtual roll reset is not active.
1 = Virtual roll preset is active.
0 = Virtual roll preset is not active.
1 = Virtual roll is at core.
0 = Virtual roll is not at core.
0 = Virtual roll is not at full roll.
1 = Length counter has reached overflow limit.
0 = Length counter is within overflow limit.
1 = Speed is above the virtual roll simulator limit.
0 = Speed is within the virtual roll simulator limit.
Simulator status.
Parameters 455
Def/FbEq16
-
10000 = 1
-
100 = 1
-
10 = 1 N/m
-
10 = 1 N
0b0000
1 = 1