ABB ACS880 Firmware Manual page 490

490 Parameters
No. Name/Value
96.100 Change user pass
code
10000000...
99999999
96.101 Confirm user pass
code
10000000...
99999999
Description
(Visible when user lock is open)
To change the current user pass code, enter a new code into
this parameter as well as
warning will be active until the new pass code is confirmed.
To cancel changing the pass code, close the user lock
without confirming. To close the lock, enter an invalid pass
code in parameter 96.02 Pass
96.08 Control board boot, or cycle the power.
See also section User lock
New user pass code.
(Visible when user lock is open)
Confirms the new user pass code entered in
user pass code.
Confirmation of new user pass code.
96.101 Confirm user pass
code, activate parameter
(page 131).
96.100 Change
Def/FbEq16
10000000
code. A
-
-