ABB ACS880 Firmware Manual page 191

No. Name/Value
RO/DIO control
word bit1
RO/DIO control
word bit2
RO/DIO control
word bit8
RO/DIO control
word bit9
Other [bit]
11.07 DIO1 ON delay
*DIO status
**Delayed DIO status
t = 11.07 DIO1 ON delay
On
t = 11.08 DIO1 OFF delay
Off
*Electrical status of DIO (in input mode) or status of selected source (in output mode). Indicated by
status.
**Indicated by 11.02 DIO delayed
0.0 ... 3000.0 s
11.08 DIO1 OFF delay
0.0 ... 3000.0 s
11.09 DIO2 function
Output
Input
Frequency
11.10 DIO2 output source
Description
Bit 1 of 10.99 RO/DIO control word
Bit 2 of 10.99 RO/DIO control word
Bit 8 of 10.99 RO/DIO control word
Bit 9 of 10.99 RO/DIO control word
Source selection (see Terms and abbreviations
page 152).
Defines the activation delay for digital input/output DIO1
(when used as a digital output or digital input).
t t
On Off
status.
Activation delay for DIO1.
Defines the deactivation delay for digital input/output DIO1
(when used as a digital output or digital input). See
parameter 11.07 DIO1 ON
Deactivation delay for DIO1.
Selects whether DIO2 is used as a digital output or input, or
a frequency output.
DIO2 is used as a digital output.
DIO2 is used as a digital input.
DIO2 is used as a frequency output.
Selects a drive signal to be connected to digital input/output
DIO2 when parameter 11.09 DIO2 function
For the available selections, see parameter
output source.
(see page 189).
(see page 189).
(see page 189).
(see page 189).
on
t
On
delay.
is set to Output.
11.06 DIO1
Parameters 191
Def/FbEq16
41
42
43
44
-
0.0 s
1
0
1
0
Time
t
Off
11.01 DIO
10 = 1 s
0.0 s
10 = 1 s
Output
0
1
2
Running