D2D And Ddcs Transmit Data - ABB ACS880 Firmware Manual

No. Name/Value
Dataset 24/25
60.65 DDCS controller
comm supervision
force
Bit Name
0 Ext 1
1 Ext 2
2 Local
3...15 Reserved
0000b...0111b
Warning
Fault
61
61 D2D and DDCS
transmit data
61.01 M/F data 1 selection
None
CW 16bit
SW 16bit
Act1 16bit
Act2 16bit
Follower CW
Used speed
reference
Torque reference
act 5
Torque reference
used
Description
Data sets 24 and 25.
Activates DDCS controller communication monitoring
separately for each control location (see section
control vs. external control
The parameter is primarily intended for monitoring the
communication with the controller when it is connected to
the application program and not selected as a control source
by drive parameters.
Value
1 = Communication monitoring active when Ext 1 is being used.
1 = Communication monitoring active when Ext 2 is being used.
1 = Communication monitoring active when local control is being
used.
DDCS controller communication monitoring selection.
The drive generates a warning (AF80 INU-LSU comm loss). 1
Drive trips on 7580 INU-LSU comm loss.
Defines the data sent to the DDCS link.
See also parameter group
Preselects the data to be sent as word 1 onto the
master/follower link.
See also parameter 61.25 M/F data 1
Master/follower functionality
None.
Control Word (16 bits)
Status Word (16 bits)
Actual value ACT1 (16 bits)
Note: Using this setting to send a reference to the follower is
not recommended as the source signal is filtered. Use the
"reference" selections instead.
Actual value ACT2 (16 bits)
Note: Using this setting to send a reference to the follower is
not recommended as the source signal is filtered. Use the
"reference" selections instead.
A word consisting of bits 0...11 of
and the bits selected by parameters 06.45...06.48.
Note: Bit 3 of the follower control word is kept on as long as
the master is modulating, and when it switches to 0, the
follower coasts to a stop.
24.01 Used speed reference
26.75 Torque reference act 5
26.02 Torque reference used
Local
on page 40).
60 DDCS communication.
value, and section
(page 74).
06.01 Main control word
(page 263).
(page 285).
(page 279).
Parameters 405
Def/FbEq16
1
0000b
1 = 1
2
Follower CW
0
1
4
5
6
27
6145
6731
6658