ABB ACS880 Firmware Manual page 305

No. Name/Value
31.15 Total trials time
1.0 ... 600.0 s
31.16 Delay time
0.0 ... 120.0 s
31.19 Motor phase loss
No action
Fault
31.20 Earth fault
No action
Warning
Fault
31.21 Supply phase loss
No action
Fault
Description
Defines a time window for automatic fault resets. The
maximum number of attempts made during any period of
this length is defined by
Note: If the fault condition remains and cannot be reset,
each reset attempt will generate an event and start a new
time window. In practice, if the specified number of resets
(31.14) at specified intervals (31.16) take longer than the
value of 31.15, the drive will continue to attempt resetting
the fault until the cause is eventually removed.
Time for automatic resets.
Defines the time that the drive will wait after a fault (or a
previous reset attempt) before attempting an automatic
reset. See parameter 31.12 Autoreset
Autoreset delay.
Selects how the drive reacts when a motor phase loss is
detected.
No action taken.
The drive trips on fault 3381 Output phase
Selects how the drive reacts when an earth fault or current
unbalance is detected in the motor or the motor cable.
No action taken.
The drive generates an
The drive trips on fault 2330 Earth
Selects how the drive reacts when a supply phase loss is
detected.
No action taken.
The drive trips on fault 3130 Input phase
31.14 Number of trials.
selection.
loss.
A2B3 Earth leakage warning.
leakage.
loss.
Parameters 305
Def/FbEq16
30.0 s
10 = 1 s
0.0 s
10 = 1 s
Fault
0
1
Fault
0
1
2
Fault
0
1