ABB ACS880 Firmware Manual page 209

No. Name/Value
AI2 max tune
AI3 min tune
AI3 max tune
14.22 DI3 ON delay
0.00 ... 3000.00 s
14.22 DIO3 ON delay
0.00 ... 3000.00 s
14.22 AI force selection
Bit Name
0 AI1
1 AI2
2 AI3
3...15 Reserved
0000b...0111b
14.23 DI3 OFF delay
0.00 ... 3000.00 s
14.23 DIO3 OFF delay
0.00 ... 3000.00 s
14.24 DIO4 function
Output
Input
14.26 DIO4 output source
Description
The measured value of AI2 is set as the maximum value of
AI2 into parameter 14.49 AI2
(Visible when 14.01 Module 1 type
The measured value of AI3 is set as the minimum value of
AI3 into parameter 14.63 AI3
(Visible when 14.01 Module 1 type
The measured value of AI3 is set as the maximum value of
AI3 into parameter 14.64 AI3
(Visible when 14.01 Module 1 type
Defines the activation delay for digital input DI3. See
parameter 14.12 DI1 ON
Activation delay for DI3.
(Visible when 14.01 Module 1 type
Defines the activation delay for digital input/output DIO3.
See parameter 14.12 DIO1 ON
Activation delay for DIO3.
(Visible when 14.01 Module 1 type
The true readings of the analog inputs can be overridden for
e.g. testing purposes. A forced value parameter is provided
for each analog input, and its value is applied whenever the
corresponding bit in this parameter is 1.
Description
1 = Force mode: Force AI1 to value of parameter
1 = Force mode: Force AI2 to value of parameter
1 = Force mode: Force AI3 to value of parameter
(FIO-11 only).
Forced values selector for analog inputs.
(Visible when 14.01 Module 1 type
Defines the deactivation delay for digital input DI3. See
parameter 14.12 DI1 ON
Deactivation delay for DI3.
(Visible when 14.01 Module 1 type
Defines the deactivation delay for digital input/output DIO3.
See parameter 14.12 DIO1 ON
Deactivation delay for DIO3.
(Visible when 14.01 Module 1 type
Selects whether DIO4 of the extension module is used as a
digital input or output.
DIO4 is used as a digital output.
DIO4 is used as a digital input.
(Visible when 14.01 Module 1 type
Selects a drive signal to be connected to digital input/output
DIO4 when parameter 14.24 DIO4 function
For the available selections, see parameter
output source.
max.
= FIO-11)
min.
= FIO-11)
max.
= FDIO-01)
delay.
= FIO-01 or FIO-11)
delay.
= FIO-11 or FAIO-01)
= FDIO-01)
delay.
= FIO-01)
delay.
= FIO-01)
= FIO-01)
is set to Output.
14.11 DIO1
Parameters 209
Def/FbEq16
4
5
6
0.00 s
10 = 1 s
0.00 s
100 = 1 s
0000b
14.28 AI1 force data.
14.43 AI2 force data.
14.58 AI3 force data
1 = 1
0.00 s
10 = 1 s
0.00 s
100 = 1 s
Input
0
1
Not
energized