Defining The Ip Address On The Processor Unit Network Adapter For Communication With The Wide Band Transceiver (Wbt) - Simrad ES80 Reference Manual

a The Windows
the network. Select
b The operating system may also open other dialog boxes to verify that the ES80
software can run on the computer. You must permit this.
Further requirements
Observe the dedicated procedures for obtaining and installing the software licence(s).
Defining the IP address on the Processor Unit network
adapter for communication with the Wide Band Transceiver
(WBT)
The communication between the Processor Unit and the transceiver(s) is made using a
high capacity Ethernet cable. If more than one transceiver is used, an Ethernet switch is
added. On the ES80, the necessary IP address is generated automatically. However, we
recommend that you manually define which IP Address and Subnet mask the Ethernet
adapter in the Processor Unit shall use for this communication.
Prerequisites
This procedure is made for the Microsoft
that you are familiar with this operating system.
Context
As long as you do not change the Processor Unit to another computer, or replace the
network adapter in your Processor Unit, you will only need to do this once.
Procedure
1 On the Processor Unit, close the ES80 program.
2 Open the
Network and Sharing Center
a In the bottom-left corner of your desktop, select the Windows
b On the right-hand side of the
c Observe that the Control Panel opens.
d Select
Network and Sharing Center
a In the bottom-left corner of your desktop, select the Windows
b On the right-hand side of the
c Observe that the Control Panel opens.
d Select
Network and Sharing Center
(If the Control Panel is shown with categories, select
.)
tasks
e On the left-hand menu, select
406273/C
®
7 Firewall may open a dialog box requesting information about
, and then select
Public
® Windows
dialog box.
Start
Start
Change adapter settings
.
Allow access
® 7 operating system. It is assumed
menu, select
Control Panel
.
menu, select
Control Panel
.
View network status and
.
Getting started
® button.
Start
.
® button.
Start
.
63