Simrad ES80 Reference Manual page 356

Simrad ES80 Reference Manual
•
Transceiver Information
The
Transceiver Information
Band Transceiver (WBT) that is used on the chosen frequency channel. Select one
of the items in the
Wide Band Transceiver (WBT).
The information provided under
operational use.
The
Download Transceiver Software
the Wide Band Transceiver (WBT). Software updates are only available if and when
distributed with the ES80 operational software.
•
Transceiver Browsing
The
Transceiver Browsing
search for transceivers on the network.
The communication is made between the Processor Unit (identified with its Local
IP Address) and one or more transceivers. To search your network for transceivers,
check that the correct IP address of the Ethernet board in the Processor Unit is shown,
then click the
Browse
the network are automatically listed in the
is identified with its applicable status label.
At the bottom of the
automatically scan for new software versions for the transceiver. Software updates
are only available if and when distributed with the ES80 operational software.
Note
When you work in the
changes made on a page. You must do this before you continue working on a different
page.
354
group shows you the technical parameters for the Wide
list to see the information about the relevant
Frequency Channels
Transceiver Information
function allows you to upgrade the software on
parameters are used when you wish to start an automatic
button. All transceivers connected to the Processor Unit through
Transceiver Browsing
dialog box, you must always select
Installation
is not required for
list. Each transceiver
Frequency Channels
field, you can set up the ES80 to
to save the
Apply
406273/C