Simrad ES80 Reference Manual page 407

Related dialog boxes
Sensor Installation page, page 363
Sensor Configuration page, page 369
I/O Setup page, page 371
BITE: Transceiver page
The ES80 can be set up to work with one or more transceivers. The
offers key information about each transceiver in use by the ES80.
How to open
This page is located in the
box. You open the
BITE
from the menu.
Setup
Description
Each transceiver is identified by its serial
number. Select transceiver from the list.
Only static information is provided.
Tip
The
Transceiver Installation
transceivers. An overview of the available transceivers is shown. As permitted by the
software license, you can assign any transducer to any Wide Band Transceiver (WBT).
The
Transceiver Installation
dialog box is located on the
Details
Select transceiver
Use the spin box to select which transceiver you wish to investigate.
Transceiver
This information reflects the type of transceiver connected.
• "GPT" identifies the "General Purpose Transceiver"
• "WBT" identifies the "Wide Band Transceiver"
• "SBT" identifies the "Single Band Transceiver"
Tip
This information is also found on the
page is located in the
Installation
is located on the
406273/C
dialog
BITE
dialog box
parameters control the installation and disconnection of
page is located in the
menu.
Setup
Transceiver Installation
Installation
menu.
Setup
Functions and dialog boxes
Transceiver
dialog box. The
Installation
page. The
dialog box.The
Installation
page
Installation
Transceiver
dialog box
405