Simrad ES80 Reference Manual page 103

: Select this button to stop the playback.
A
Stop
B : Select this button to start the playback, or to pause it.
Play/Pause
: Select this slider and move it sideways to adjust the replay speed.
C
Replay speed
D : This button shows which file you are currently playing.
Replay file
: This bar shows you the replay progress of the current file.
E
Progress
Procedure
1 Open the
Operation
2 Select
Operation
3 Select
Replay File
The
Replay File
which file(s) to play back. The file names were
generated automatically during recording, and
each file is identified with the time and date it
was made.
4 Select to choose a replay file.
Add
A standard operating system dialog box is used to locate and select the files you
wish to use.
5 If you wish to replay the selected files in an "endless" loop, select
6 If you wish to create index files for the selected files, select
.
files
During raw file recording, the ES80 automatically creates index files to allow for
easier navigation in the replay files. On old files, however, these index files are not
present. If you activate the
created on the selected files before playback starts.
Note
Creating index files can take a long time if you have many or/and large replay files,
or if the files are stored on a network server.
7 Select to save the selected settings and close the dialog box.
OK
8 Set to Replay.
Operation
The replay bar opens automatically. It is positioned directly below the top bar at the
top of the ES80 presentation.
406273/C
menu.
to see the available choices.
to open the dialog box.
dialog box allows you to choose
Check for missing index files
Operating procedures
.
Loop
Check for missing index
function, the index files are
101