Trawl Page - Simrad ES80 Reference Manual

Simrad ES80 Reference Manual
Related tasks
Selecting measurement units, page 149

Trawl page

When you use a trawl, the ES80 can draw the upper and lower trawl lines in the
echogram. In order to this, the ES80 needs to know the relevant trawl parameters.
If your trawl system is connected to the ES80, these parameters are automatically
available. If the trawl system is not connected, the
the parameters manually.
Prerequisites
The dialog box is not available when your ES80 is set to Replay mode.
Installation
How to open
This page is located in the
Description
A Simrad ITI (Integrated Trawl
Instrumentation) system can be
connected to the ES80. Communication
with the ITI system is based on both
NMEA and proprietary telegrams, and
all necessary parameters are automatically defined. The information can be used to draw
the upper and/or lower trawl lines in the ES80 echogram.
If another trawl or catch monitoring system is used, and this system does not provide the
trawl opening and/or trawl distance automatically, the values must be entered manually.
In order to see the trawl lines in the echogram presentation, they must be enabled in
the dialog box.
Echogram
Tip
To connect and set up the actual interface, use the
page is located in the
Installation
To set up the communication parameters between the trawl or catch monitoring system
and the ES80, use the
and dialog boxes.
Output
When you work in the
changes made on a page. You must do this before you continue working on a different
page.
380
dialog box. To open, select it on the
Installation
Installation
page. The
I/O Setup
dialog box, you must always select
Installation
options allow you to define
Trawl
Sensor Installation
dialog box.
page is located in the
I/O Setup
menu.
Setup
page. The
Sensor
Installation
to save the
Apply
406273/C