I/O Setup Page - Simrad ES80 Reference Manual

Functions and dialog boxes
Return to...
Installation dialog box, page 346
Related tasks
Installing navigation sensors and other sensors, page 164
Defining the serial and Ethernet (LAN) port parameters, page 165
Configuring the sensor interface, page 169
Related dialog boxes
Sensor Installation page, page 363
BITE: Sensors page, page 404
Datagram formats
NMEA datagram formats, page 491
Proprietary datagram formats, page 504
Third party datagram formats, page 517

I/O Setup page

In order to communicate with peripheral devices, the Processor Unit offers several serial
and/or Ethernet (LAN) ports. The number of communication ports depends on how your
Processor Unit is set up and configured. The settings allow you to define
I/O Setup
which information is imported by the Processor Unit.For each port, you can set up the
communication parameters, and monitor the data flow.
Prerequisites
The dialog box is not available when your ES80 is set to Replay mode. The
Installation
dialog box is not available when your ES80 is set to Inactive mode.
Output
How to open
This page is located in the dialog box. This page is also located in the
Installation Output
dialog box. To open, make a selection on the menu.
Setup
Description
The ES80 software automatically scans the Processor Unit to locate and identify the
available communication ports.
371
406273/C