Installing One Or More Transducers - Simrad ES80 Reference Manual

8 Verify that the license string is placed in the
If necessary, select the license string on the left side, and click the arrow button [>]
to move it to the
9 Select and then
Apply
dialog box.

Installing one or more transducers

The transducers you wish to use with the ES80 must be "installed" as a part of the
software configuration. Which transducers to use depends on the number of transceivers
in your system, and the licenses you have for these. Unless you replace a broken
transducer, or add a new, you only need to do this once.
Prerequisites
It is assumed that the ES80 software has been installed, and that all relevant license
strings have been applied. You need to know the type and serial number of each
transducer that you wish to install.
Context
Each transducer is added using the
page is located in the
Installation
You can only choose a transducer from the
file on your Processor Unit. It contains all the transducers that are compatible with the
Wide Band Transceiver (WBT), but since the software is common for several systems
there may also be non-compatible transducers in the list. The list also includes technical
specifications for each transducer. You can not see this information, but it is used by
the ES80 to set up the operational parameters. This allows the Wide Band Transceiver
(WBT) to optimize its performance for the individual transducer models.
If you cannot find your transducer in the list, contact you dealer, agent or Kongsberg
Maritime to upgrade the relevant software component in the ES80.
Note
Just making changes and selecting
Select what to install, define the relevant parameters, and then select
Procedure
1 Open the
Setup
2 On the menu, select
Setup
Observe that the
of pages selected from the menu on the left side.
406273/C
Currently active licenses
to save all the parameters and close the
Close
Transducer Installation
Installation
at the bottom of the page will not install anything.
OK
menu.
Installation
dialog box opens. This dialog box contains a number
Installation
Currently active licenses
list.
page. The
dialog box.
list. The list is generated from a system
Model
.
Getting started
list.
Installation
Transducer
.
Add
67