Serial Port Setup Dialog Box - Simrad ES80 Reference Manual

Simrad ES80 Reference Manual
Remote IP Address
This is the Internet Protocol (IP) address for a peripheral device. This peripheral
device is for example a sensor on the network, or another navigation or
hydroacoustic system. If the data communication between your Processor Unit and
the peripheral device is set up to only import data from the device, the remote IP
address is not required.
If you want to export information from the Processor Unit to one or more peripheral
devices (broadcast), set
setting. If you use point-to-point communication in a closed network, you need
to set the remote IP address manually.
Remote Port
The
Remote Port
Unit to a peripheral device on the local area network (LAN). This peripheral device
is for example a sensor on the network, or another navigation or hydroacoustic
system. The application on the peripheral device will "listen" to this port number.
If you want to establish point-to-point communication for data import from a
peripheral device on the network, you may need to define the network port on
this device.
To find the port number, consult the documentation for the device, and/or the
application to be used on it.
Return to...
Installation dialog box, page 346
Output dialog box, page 386
I/O Setup page, page 371

Serial Port Setup dialog box

Serial line communication is important for ES80 operation. The information from
external devices, such as navigation sensors, is based on serial line "datagrams". For
most commercial devices, the formats of these datagrams are defined by NMEA
(National Marine Electronics Association). The
to define the communication parameters for serial line ports. These ports are typically
used to interface external devices, such as navigation sensors.
How to open
To open the
Serial Port Setup
and select .
Setup
The page is located in the
I/O Setup
dialog box is located on the
menu.
Setup
444
Remote IP Address
is important if you want to export information from the Processor
dialog box, select a serial port on the
Installation
menu. The
Setup
to 255.255.255.255. This is the default
dialog box allows you
Serial Port Setup
and dialog boxes. The
Output
dialog box is also located on the
Output
page,
I/O Setup
Installation
406273/C