Simrad ES80 Reference Manual page 143

Zoom information pane
A
Zoom rectangle used
B
to define the size of the
zoomed area
In this screen capture, the
zoomed area rectangle
is positioned close to the
Zoom information pane. You
can however place the pane and the zoomed area independently anywhere you like
inside the active view.
Each Zoom information pane export information. When opening the Biomass and/or the
Size Distribution information panes, you will automatically receive information from
each of the Zoom information panes that you have opened.
Procedure
1 Click in any echogram view to make it "active".
The setting you choose will only be valid for the currently "active" echogram. The
"active" echogram view is identified with a thicker border.
2 On the top bar, select the appropriate button to open the information pane.
To open the second and third Zoom information panes, simply select the
button repeatedly.
3 Select a
Transparency
The chosen transparency percentage is used on all open information panes.
4 Position the zoom rectangle over the area in the echogram that you wish to
investigate.
Click in the middle of the rectangle, and keep the mouse button depressed. Drag it
to the requested position. Release the mouse button.
5 Click the corners of the zoom rectangle, and drag to change it to desired size.
6 Control the behaviour of the zoomed area.
Use
Area Fixed To Vessel
rectangular zoomed area is established, it can either follow the echogram while it
moves towards the left, or it can stay put.
• When
Area Fixed To Vessel
positioned on the echogram. The echoes shift through the area, and therefore
also shift through the Zoom information pane.
406273/C
setting that fits your requirements.
to control the behaviour of the zoom function. When the
is active, the zoomed area will be permanently
Operating procedures
Zoom
141