Depth Output Page - Simrad ES80 Reference Manual

pane. The information in the History presentation is the same as on the original
echogram presentation.
Every time the History file is saved to the hard disk, the pinging may be interrupted.
It is therefore possible to disable the History function.
Note
If you open the History information pane while history logging is disabled, the
information presented reflects the latest echoes recorded before the logging was
disabled. When history logging is enabled after some time, you will have a "hole"
in the ping sequence.
Return to...
Output dialog box, page 386
Related tasks
Defining the file and folder settings for data recording, page 97
Recording echo data, page 98
Selecting Replay mode, page 100
Choosing which echo data file(s) to replay, page 100
Accessing the echo data files to delete, move or copy them, page 102
Disabling the automatic echogram history recording, page 128
Related topics
History information pane description, page 234
Related functions
Record function, page 325

Depth Output page

The ES80 can export depth information on a dedicated communication port (serial or
Ethernet) The
Depth Output
Prerequisites
The dialog box is not available when your ES80 is set to Inactive mode.
Output
How to open
This page is located in the
the menu.
Setup
406273/C
page is used to set up the output parameters.
dialog box. The
Output
Functions and dialog boxes
dialog box is located on
Output
391