Increasing The Visibility Of The Information Panes; Selecting The Navigational Information To Appear On The Top Bar - Simrad ES80 Reference Manual

Increasing the visibility of the information panes

When you open an information pane, you will see that it is transparent. This transparency
allows you to see the echograms data behind the pane, but it may also reduce the
visibility of the information in it.
Context
The information panes provided by the ES80 can be placed anywhere on top of the
views in the presentation.
In order not to loose information, the panes have been designed so you can see through
them. The degree of transparency can be controlled with this
can adjust the setting from 0% (no transparency) to 90% (almost full transparency) in
steps of 10%.
Procedure
1 Open the
Display
2 Select a
Transparency
The chosen transparency percentage is used on all open information panes.
To change the setting, move the cursor to either side of the button, and observe that
the background colour changes. Select [—] on the left side to decrease the setting
value, or select [+] on the right side to increase. Select the middle of the button to
open it.If you have a keyboard connected to the ES80, you can type the requested
value into the text box.
Selecting the navigational information to appear on the top
bar
The top bar can contain navigational information. You can select which navigation
elements that will be shown at the top of the ES80 presentation.
Context
The page offers a range of "on/off switches". Some of these "on/off switches"
General
are used to enable or disable the navigational information on the top bar.
Note
The information shown on the ES80 top bar must not be used for vessel navigation!
Procedure
1 Open the
Display
406273/C
menu.
setting that fits your requirements.
menu.
Operating procedures
function. You
Transparency
145