Adding Comments And Annotations To The Echograms - Simrad ES80 Reference Manual

Simrad ES80 Reference Manual
4 Type any text into the box.
The size of the box will adjust to the length of your text.
If you do not have a computer keyboard connected to your ES80 system, select the
button to open an on-screen keyboard.
Keyboard
5 Select to place the annotation in the echoghram.
OK
6 Select to close the dialog box.
Cancel

Adding comments and annotations to the echograms

When you study an echogram, it is often useful to add personal comments to it. Several
different annotation types may be added to the echogram. They are displayed on the
echogram if this feature is enabled in the
Context
Use the
Annotations
Comments can be used to identify specific events such as specific echoes, unusual
bottom conditions, or simply for keeping track of time or distance. The
is located in the
Installation
The page in the
Lines
in the echograms. Annotations can only be added to the echogram while in Normal
operational mode.
When you save raw data, the annotations you have defined are stored as annotation
datagrams.
Procedure
1 Open the
Setup
2 On the menu, select
Setup
Observe that the
of pages selected from the menu on the left side.
3 On the left side of the
4 Specify the annotations you wish to use, and how you wish to trigger them.
5 Select and then
Apply
dialog box.
6 Click once in the echogram view that you wish to change.
This will make the view "active". A thick border is placed on the selected view
to visualize this.
7 Open the
Active
124
page to type comments and insert annotations into the echograms.
dialog box.
dialog box allows you to enable or disable annotations
Echogram
menu.
Installation
dialog box opens. This dialog box contains a number
Installation
dialog box, select
Installation
to save all the parameters and close the
Close
menu.
dialog box.
Echogram
.
Annotations
page
Annotations
.
Installation
406273/C