Adding Manual Trawl Lines To The Echogram Presentation - Simrad ES80 Reference Manual

Simrad ES80 Reference Manual
Context
A Simrad ITI (Integrated Trawl Instrumentation) system can be connected to the ES80.
Communication with the ITI system is based on both NMEA and proprietary telegrams,
and all necessary parameters are automatically defined. The information can be used to
draw the upper and/or lower trawl lines in the ES80 echogram.
This is a visual enhancement. It does not have any effect on the ES80 performance.
Procedure
1 Click once in the echogram view that you wish to change.
This will make the view "active". A thick border is placed on the selected view
to visualize this.
2 Open the
Active
3 Select
Echogram
Observe that the
4 On the left side of the
5 Select to see the trawl lines in your echogram presentation.
Trawl
6 Apply the change(s) you have made.
a Select
Apply
echogram view.
b Select
Apply to All
of the same type.
7 Close the dialog box.

Adding manual trawl lines to the echogram presentation

When you use a trawl, the ES80 can draw the upper and lower trawl lines in the
echogram.
Context
A Simrad ITI (Integrated Trawl Instrumentation) system can be connected to the ES80.
Communication with the ITI system is based on both NMEA and proprietary telegrams,
and all necessary parameters are automatically defined. The information can be used to
draw the upper and/or lower trawl lines in the ES80 echogram.
If another trawl or catch monitoring system is used, and this system does not provide the
trawl opening and/or trawl distance automatically, the values must be entered manually.
Procedure
1 Open the
Setup
122
menu.
.
dialog box opens.
Echogram
dialog box, select
Echogram
if you wish to apply the chosen setting only to the currently active
if you wish to use the chosen setting on all the echograms
menu.
to open the page.
Lines
406273/C