Transceiver Pages - Simrad ES80 Reference Manual

Simrad ES80 Reference Manual

Transceiver pages

The pages are used to define the settings necessary to connect the Processor
Transceiver
Unit to each transceiver. In turn, each transceiver is assigned one or more transducers.
Two pages are used. The
transceivers, and allows you to make the connections to the Processor Unit, and to the
transducers you have installed. The
the Internet Protocol (IP) Addresses used by the Processor Unit to communicate with
the transceivers.
Prerequisites
The dialog box is not available when your ES80 is set to Replay mode.
Installation
How to open
This page is located in the
Description
The pages are used to define the settings necessary to connect the Processor
Transceiver
Unit to each transceiver. Two pages are used.
•
Transceiver Installation
The
Transceiver Installation
of transceivers. Every time the page is opened, the ES80 software automatically
performs a search on the Ethernet network for transceivers. An overview of the
available transceivers is shown. As permitted by the software license, you can assign
any transducer to any Wide Band Transceiver (WBT).
Transceiver Installation page, page 353
•
Transceiver IP Address
If you have several transceivers in a large system, it may be useful to control the
IP Addresses used to communicate with each transceiver. These IP Addresses are
defined by a BOOTP server in the Processor Unit, and assigned to each Wide Band
Transceiver (WBT). This functionality is provided for advanced users. We assume
that you are familiar with Ethernet communication and the relevant parameters.
Transceiver IP Address page, page 360
Tip
When you work in the
changes made on a page. You must do this before you continue working on a different
page.
Key information about the transceiver(s) can also be found in the
Equipment) dialog box.
352
Transceiver Installation
Transceiver IP Address
dialog box. To open, select it on the
Installation
parameters control the installation and disconnection
dialog box, you must always select
Installation
page shows you a list of the available
page allows you to control
Apply
BITE
menu.
Setup
to save the
(Built-In Test
406273/C