Echogram Dialog Box - Simrad ES80 Reference Manual

Details
Bottom Gain
Adjust the setting to fit your requirements.
Apply to All
Select this box to use the chosen setting on all the echograms of the same type.
Related tasks
Investigating the sub-bottom conditions, page 125

Echogram dialog box

The dialog box allows you to set up the parameters controlling the echogram
Echogram
presentation. Two pages control the horizontal lines and the echogram type with applied
TVG (time variable gain). One page controls how fast the echogram travels horizontally
across the presentation.
How to open
This dialog box is opened from the
Description
The dialog box is the main source for all echogram presentation choices.
Echogram
Note
The setting you choose will only be valid for the currently "active" echogram. Click
in any echogram view to make it "active". The "active" echogram view is identified
with a thicker border. Select
the echograms of the same type.
The dialog box offers tabs to present the settings.
•
Lines
The page in the
Lines
vertical lines used in the echogram presentation. You can make the bottom easier to
see, and add lines that hold additional information. The vertical scale of the echogram
presentation can be changed. If you wish to add annotations to your echogram, these
are enabled on this page.
Echogram: Lines page, page 421
406273/C
menu.
Active
if you wish to use the chosen settings on all
Apply to All
dialog box allows you to control the horizontal and
Echogram
Functions and dialog boxes
419