Installation Dialog Box - Simrad ES80 Reference Manual

Simrad ES80 Reference Manual

Installation dialog box

Prior to use, the ES80 must be set up to communicate with the relevant peripherals. This
includes the transducer(s). The
individual pages, and allows you to set up the basic parameters related to installation and
operation. In most cases, you only need to do this once.
Prerequisites
The dialog box is not available when your ES80 is set to Replay mode.
Installation
How to open
This dialog box is opened from the
Description
The dialog box offers a menu on the left side, and several pages for
Installation
parameters on the right side. When transducers and sensors are added to the ES80
configuration, these are added as collapsible items on the menu.
The page can also be opened from the
I/O Setup
box is located on the
Note
When you work in the
changes made on a page. You must do this before you continue working on a different
page. When you install something (sensors, transducers, etc.), you must first select what
you want to install, then define the relevant parameters, and finally select
346
Installation
menu.
Setup
menu.
Setup
dialog box, you must always select
Installation
dialog box collects all relevant peripherals on
dialog box. The
Output
dialog
Output
to save the
Apply
.
Add
406273/C