Start Range Function - Simrad ES80 Reference Manual

Simrad ES80 Reference Manual
Example
and
Start Range
In a bottom echogram, set the
make the echogram start from 5 meters above the bottom. Set
5 meters plus 10 = 15 meters. The echogram will now show the area from
5 meters above the depth, and down to 10 meters "below" the bottom. The
bottom contour will appear as a flat line.
Details
Range
This setting controls the displayed depth range in the echograms. The start (upper)
depth of the echogram is the value defined by the
Select either side of the button to choose a value. Select the middle of the button to
open it.
Auto
By selecting
Auto
current depth.
Apply to all
The range value shown and selected is by default only applied to your currently
selected echogram. If you wish to apply the new range setting to all the current
echograms of the same type, select
Related tasks
Choosing and
Range
Choosing and
Range
Conceptual descriptions
Observation range versus operational frequency, page 457
About bottom echoes, page 458

Start Range function

The function allows you to specify the start depth of the echogram. The value
Start Range
defines from which depth in the water column the presentation shall start. The depth
value shown and selected is by default only applied to the currently selected echogram.
How to open
This function is opened from the
310
in bottom related echogram
Range
Start Range
, the ES80 automatically adjusts the range according to the
Apply to all
values in a surface related echogram, page 94
Start Range
values in a bottom related echogram, page 95
Start Range
menu.
Main
value to –5 meters. This will
Range
setting.
Start Range
.
to the
406273/C