Enhancing The Bottom Contour In The Echograms - Simrad ES80 Reference Manual

Simrad ES80 Reference Manual
6 Apply the change you have made.
a Select
Apply
echogram view.
b Select
Apply to All
of the same type.
7 Select to close the dialog box.
OK

Enhancing the bottom contour in the echograms

In order to make the bottom easier to identify, certain visual enhancements may be
applied. These enhancements are made using the
Context
The following enhancements can be used to increase the readability of the bottom
contour.
•
Bottom Line
The Bottom Line can be added to your echogram to enhance the visual bottom
detection. It appears as thin line that follows the bottom contour. The line is drawn in
the current foreground colour.
•
White Line
The White Line can be added to your echogram to enhance the visual bottom
detection. It appears as thick line in the current background colour (normally white)
that follows the bottom contour. This line will not remove information, it will simply
"push" the echo information further down in order to make the bottom easier to see.
You can use the White Line and the Bottom Line functions simultaneously.
Note
This is a visual enhancement. It does not have any effect on the ES80 performance.
Procedure
1 Click once in the echogram view that you wish to change.
This will make the view "active". A thick border is placed on the selected view
to visualize this.
2 Open the
Active
3 Select
Echogram
Observe that the
4 On the left side of the
118
if you wish to apply the chosen setting only to the currently active
if you wish to use the chosen setting on all the echograms
menu.
.
dialog box opens.
Echogram
dialog box, select
Echogram
page in the
Lines Echogram
to open the page.
Lines
dialog box.
406273/C