Annotations Page - Simrad ES80 Reference Manual

Simrad ES80 Reference Manual

Annotations page

When you study an echogram, it is often useful to add personal comments to it.
Comments can be used to identify specific events such as specific echoes, unusual
bottom conditions, or simply for keeping track of time or distance. The
choices allow you to type comments and annotations into the echograms. The comments
are automatically saved when you enable raw data recording.
Prerequisites
The dialog box is not
Installation
available when your ES80 is set to
Replay mode.
How to open
This page is located in the
dialog box. To open, select it on the
menu.
Setup
Description
The page in the
Lines
dialog box allows you to enable or disable annotations in the echograms. Several
different annotation types may be added to the echogram. They are displayed on the
echogram if this feature is enabled in the
added to the echogram while in Normal operational mode.
Note
When you work in the
changes made on a page. You must do this before you continue working on a different
page.
You can add annotations manually, or import information as datagrams using a serial or
LAN (Ethernet) communication port. To connect and set up the actual interface, use the
page. The
Sensor Installation
box. To set up the communication parameters, use the
page is located in the
Tip
Sometimes it can be useful to place a single written comment on the echogram. The
dialog box offers that function. Type a text string. Select
Manual Annotation
the dialog box to add the text to your echogram. The
is opened from the
Setup
The button is used to initiate an event annotation on the echogram.
Event
382
Installation
Echogram
Echogram
dialog box, you must always select
Installation
Sensor Installation
and
Installation Output
menu
dialog box. Annotations can only be
page is located in the
page. The
I/O Setup
dialog boxes.
Manual Annotation
Annotations
to save the
Apply
dialog
Installation
I/O Setup
in
OK
dialog box
406273/C