Table of Contents
Advertisement
Simrad ES80 Reference Manual
Setting up data export to Olex
The ES80 allows you to export data to the proprietary Olex system. The output
parameters for the data export are defined in the
Prerequisites
This procedure assumes that:
• The Ethernet adapter in the Processor Unit is set up with a unique IP address.
• The Olex computer is connected to the Processor Unit.
Procedure
1
Select
Operation
2
On the
menu, select
Setup
Observe that the
of pages selected from the menu on the left side.
3
On the left side of the
4
Set up the Ethernet (LAN) port communication parameters.
a
Select
Add LAN Port
b
On the
I/O Setup
c
Select
Setup
d
Set up the relevant communication parameters.
• Name: Olex
• Local IP Address: 157.237.14 20
• Local Port: 2020
• Remote IP Address: 157.237.14.13
• Remote Port: 2020
e
Select
Apply
f
Select
OK
5
Select
Operation
6
Open the
Setup
7
Select
.
Output
Observe that the
pages selected by the menu on the left side.
182
, and set it to Inactive.
Installation
dialog box opens. This dialog box contains a number
Installation
dialog box, select
Installation
.
page, select the port you wish to set up.
below the list to open the
.
to save the selected settings and close the dialog box.
, and set it to Normal.
menu.
dialog box opens. This dialog box contains a number of
Output
dialog box.
Output
.
I/O Setup
LAN Port Setup
.
dialog box.
406273/C
- Quick Links:
- Simrad Es80
Hide quick links:
Advertisement
Table of Contents
