Checking The Current Software Version - Simrad ES80 Reference Manual

Procedure
1 On the Processor Unit, close the ES80 program.
2 Open the
Network and Sharing Center
a In the bottom-left corner of your desktop, select the Windows
b On the right-hand side of the
c Observe that the Control Panel opens.
d Select
Network and Sharing Center
(If the Control Panel is shown with categories, select
.)
tasks
e On the left-hand menu, select
f Click once on your network adapter to select it, then right-click and select
on the shortcut menu.
Properties
g On the list of connections, select
.
Properties
3 Select
Use the following IP address
• : 157.237.15.12 (Recommended)
IP Address
• : 255.255.255.0
Subnet mask
You can leave
Subnet mask
saying that the message subnet mask is missing, select
mask is then automatically generated.
4 Select to save the selected settings, and then close all the dialog boxes.
OK
Further requirements
If you later need to change the IP address, always restart the transceiver before you
start the ES80.

Checking the current software version

Every ES80 software release is uniquely identified. You can easily identify your current
software version and the relevant release information in the
Context
The ES80 program is released with a specific software version. The
displays the current version number. The version described in this Reference Manual is
1.3.x.
If you wish to find the latest software version for the ES80, check our website.
• https://www.simrad.com
406273/C
dialog box.
menu, select
Start
.
Change adapter settings
Internet Protocol 4 (TCP/IPv4)
, and type the IP address and network mask.
blank and select . When you see an error message
OK
Operating procedures
®
Start
.
Control Panel
View network status and
.
, and then
again. A default subnet
OK
dialog box.
About
dialog box
About
button.
189