Simrad ES80 Reference Manual page 353

•
Z Offset [m]
Origin. Adjust with a positive value for Z if the transducer is located under
the ship origin.
Add
When you are adding a new transducer to the ES80 configuration, select
to finalize to process. The transducer you have added is placed in the
list.
Transducers
Edit
The functionality on the
Edit
change the information you have provided for the transducer. You cannot change
the model identification and the serial number. Select
changes. Select
Remove
The functionality on the
Remove
delete the information you have provided for the transducer.
Note
There is no "undo" functionality.
Return to...
Installation dialog box, page 346
Related tasks
Installing one or more transducers, page 199
Checking the transducer by means of the BITE functionality, page 210
Inspecting and cleaning the transducer face, page 211
Painting the transducer face, page 213
Related topics
Rules for transducer handling, page 214
Approved anti-fouling paints, page 215
Related dialog boxes
BITE (Built-In Test Equipment) dialog box, page 400
BITE: Transducer page, page 407
406273/C
: Select the offset value on the Z axis (vertical) from the Ship
Transducer Installation
to save the changes you have made.
Apply Changes
Transducer Installation
Functions and dialog boxes
Add
Installed
page makes it possible to
to make the relevant
Edit
page makes it possible to
351