Adjusting The Screen Resolution - Simrad ES80 Reference Manual

Adjusting the screen resolution

Some computers have graphic adapters that are not able to detect the resolution of
the current display. This limitation can also be caused by the display cable, or by
imperfections in a display matrix system. In such cases, you must use the functionality
of the operating system to adjust the screen resolution.
Prerequisites
This procedure is made for the Microsoft
Windows ® 7 operating system. It is
assumed that you are familiar with this
operating system.
Context
As a general recommendation, you should
set the screen resolution as high as possible.
This will allow you more "space" in the
ES80 presentation to offer more detailed
information. The physical width of your
top bar will also be extended, and free space
for icons and navigational information.
Unless you change the hardware (computer,
graphic adapter or display), you will only
need to do this once.
Procedure
1 On the Processor Unit, close the ES80 program.
2 In the bottom-left corner of your desktop, select the Windows
3 On the right-hand side of the
4 Observe that the Control Panel opens.
5 In the
Control Panel
screen resolution
6 Change the display settings.
a Make sure that the correct display is shown.
b Change the resolution to maximum permitted resolution for the display.
c Select .
OK
d Observe that the screen resolution changes.
e If you are satisfied with the new resolution, select
acknowledge dialog box.
7 Click the [X] in the top right corner to close the Control Panel.
406273/C
®
menu, select
Start
dialog box, under
.
Control Panel
Appearance and Personalization
Keep changes
Getting started
®
button.
Start
.
, select
Adjust
in the
61