Simrad ES80 Reference Manual page 362

Simrad ES80 Reference Manual
Use Point-to-Point if you know the Internet Protocol (IP) Address of the
transceiver. You must then type the this IP Address into the
Browse
This button initiates a search on the network for available transceivers. The
transceivers that are found are automatically listed in the
their appropriate status indicators.
Transceiver Software
At the bottom of the
automatically scan for new software versions for the transceiver. Software updates
are only available if and when distributed with the ES80 operational software. The
software release note provided will then include the necessary instructions.
Return to...
Installation dialog box, page 346
Related tasks
Installing transceiver channels, page 201
Installing GPT transceiver channels, page 203
Disconnecting transceiver channels, page 205
Transceiver IP Address page
The
Transceiver Installation
transceivers. If you have several transceivers in a large system, it may be useful to
control the IP Addresses used to communicate with each transceiver. These IP Addresses
are defined by a BOOTP server in the Processor Unit, and assigned to each Wide Band
Transceiver (WBT).
Description
In order to establish communication between the Processor Unit and the transceiver(s),
each transceiver must have unique Internet Protocol (IP) Address. The software in
the Processor Unit includes a function ("Bootp server") that automatically defines and
assigns one IP address to each transceiver.
360
Transceiver Browsing
parameters control the installation and disconnection of
Remote IP Address
Frequency Channels
field, you can set up the ES80 to
box.
with
406273/C