Simrad ES80 Reference Manual page 395

• : Select
Monitor
dialog box allows you to study the communication stream on the chosen serial
line or LAN port.
Select Channel
Select from which channel you wish to export the data from. "Best practice" is to
use the lowest frequency. In this context, the phrase channel is used as a common
term to identify the combination of transceiver, transducer and operating frequency.
The text string identifies the channel using the following information:
• Transducer name
• Transducer serial number
Talker ID
If you want to specify a dedicated Talker ID on the datagram format, it can be
defined here.
Every NMEA datagram starts with a dollar sign. A "talker identifier" tag with two
characters follows. This identifier is followed by three characters that define the
type of message. The Talker ID identifies the system that sends the datagram. You
may leave this box blank. This means that two blank characters are inserted into
the datagram. You may also specify two characters that identifies the ES80 as the
"sender". In most cases, you will only need to define a Talker ID if your receiving
system needs it for specific purposes.
Example
$ESDBT,x.x,f,y.y,M,z.z,F*hh<CR><LF>
In this NMEA depth datagram, the Talker ID is "ES", which means
"echo sounder".
Tip
If you do not have a computer keyboard connected to your ES80 system, select the
button to open an on-screen keyboard.
Keyboard
Add
Select to start export of the chosen data format. Once an output type has been
Add
defined, it is listed in the
Remove
Once an output type has been defined, it is listed in the
the left side of the page. To remove the output, select the relevant format in the
Installed Outputs
Edit
Once an output type has been defined, it is listed in the
the left side of the page. To edit the settings of a specific output, select it in the
406273/C
to open the
Monitor
Installed Outputs
box, and then select
Functions and dialog boxes
dialog box. The
Port Monitor
box on the left side of the page.
Installed Outputs
.
Remove
Installed Outputs
Port Monitor
box on
box on
393