Biomass Line Description - Simrad ES80 Reference Manual

Simrad ES80 Reference Manual
The page in the dialog box allows you to enable or disable annotations
Lines Echogram
in the echograms. Select Text or Line to allow Annotation markers to be shown in the
echogram. If you select Line, each text annotation is followed by a vertical line for
improved visibility.
Related tasks
Enhancing the bottom contour in the echograms, page 118
Adding vertical marker lines to the echogram, page 119
Adding horizontal depth lines to the echograms, page 120
Adding a variable depth line to the echogram, page 121
Related dialog boxes
Manual Annotation dialog box, page 342
Installation dialog box, page 346
Annotations page, page 382
Echogram dialog box, page 419
Echogram: Echogram page, page 424

Biomass Line description

The Biomass Line allows you to monitor the current biomass in the echogram. This
function writes an extra thick and brightly coloured curve on the echogram.
How to open
To activate the Biomass Line, click in the echogram
view to make it "active".
Select on the menu. Select the
Echogram Active Lines
tab to open the page. On the page, enable the
Lines
Biomass Line function.
Description
The Biomass Line can be added to your echogram to retrieve additional information.
This function writes an extra thick and brightly coloured curve on the echogram. The
Biomass Line shows you the measured biomass for each individual ping. This is a visual
enhancement. It does not have any effect on the ES80 performance.
270
406273/C